TheHandy — Funscript-Compatible Devices

HaptiQ supports 2 TheHandy devices for real-time funscript synchronization.

• TheHandy Oh! funscript
• TheHandy The Handy funscript

How to connect The Handy toys

The Handy connects over Wi-Fi with its connection key, so it works in any browser on any device, including iPhone and iPad. HaptiQ runs it in HDSP mode and sends position commands.

• Set it up on Wi-Fi with The Handy’s own app and copy the connection key.
• In HaptiQ open Devices → The Handy (Wi-Fi), paste the key and press Connect.
• Device Doctor checks it is online, switches it to HDSP if needed, and measures the round trip to set the sync offset.

The Handy setup guides

• The Handy (Stroke (position)) · step-by-step

Device Doctor fixes

Bluetooth is off

Device Doctor checks this first. On Windows turn it on in Settings → Bluetooth & devices; on a Mac use Control Centre; on Android pull down the quick settings. Then press Connect toy again.

Bluetooth permission was blocked

Click the icon left of the address bar → Site settings and allow Bluetooth for haptiq.app. On Android, allow Nearby devices for Chrome (Settings → Apps → Chrome → Permissions) or for the HaptiQ app.

The Bluetooth list is empty

The toy is not advertising. Usual causes: it is off or asleep, it is still connected to the maker’s app or your phone, or it is too far away. Wake it, close the other app, keep it within a metre and press Connect toy again. If the list is still empty, run Device Doctor and press Send diagnostic log so the case can be checked.

Found, but it does not answer or keeps dropping

Close every other app that might hold the toy (the maker’s app, Lovense Remote, Intiface), turn the toy off and on, charge it, and keep it close. Device Doctor reconnects it and runs a feel test. For JoyHub toys, Advanced → Classic Bluetooth mode is a second path if the first one stalls.

Wrong mode

The Handy must be in HDSP mode for web playback; Device Doctor switches it for you. Some JoyHub models show “This model runs smoother in Classic Bluetooth mode” after connecting; press Switch.

Connected, but nothing moves

Run Device Doctor: it sends a test command and asks whether you felt it. Also check the part of the script you are playing actually moves; a flat section of a funscript produces genuine stillness.

Open Device Doctor

Sync offset calibration

1. Connect the toy, then open Device Doctor (Devices → Device Doctor, or haptiq.app/devices?doctor=1).
2. Let it run to the Sync calibration step. It measures how late the toy acts and saves that as the toy’s sync offset, so commands go out that many milliseconds early.
3. If the lag cannot be measured, HaptiQ uses the typical offset other owners of the same toy calibrated, or none at all; the Doctor says which.
4. The offset is stored per toy and per connection type (built-in Bluetooth, Intiface, Wi-Fi), within ±1000 ms. Run the Doctor again after you change how the toy connects.
5. Steady lag is what an offset fixes. Lag that comes and goes is signal: move closer, charge the toy, and keep 2.4 GHz Wi-Fi traffic away from it.

Sign up free and connect your The Handy toy · Already have an account? Connect toy · HaptiQ for Android

Frequently asked questions

Does HaptiQ work with TheHandy devices?

Yes. HaptiQ supports 2 TheHandy devices in its index, 2 of which are verified rather than inferred from a manufacturer listing. A funscript is device-agnostic, so the same motion file plays on any of them.

How do TheHandy devices connect to HaptiQ?

Every TheHandy device in the index connects straight from the browser — 2 over Bluetooth Low Energy via Web Bluetooth. No Intiface Central and no desktop software required.

Do I need Intiface Central for TheHandy?

No. Every TheHandy device here pairs straight from a Chromium browser. HaptiQ still supports Buttplug.io if you prefer routing through Intiface.

Which browsers work with TheHandy devices?

Web Bluetooth models need Chrome, Edge, Opera or another Chromium browser on desktop or Android — Safari and Firefox do not implement Web Bluetooth.

What kinds of TheHandy devices does HaptiQ support?

The index covers external vibrator (1), onahole (1). HaptiQ maps the vertical motion in a funscript onto whatever actuation each one provides, so scripts written for other hardware still play.

Can I generate a funscript for a TheHandy device from my own video?

Yes. Upload a video or paste a link and HaptiQ's motion analysis produces a .funscript you can play on any TheHandy device or export for another player. Large files upload in parts, so multi-gigabyte VR video is supported.

Open in HaptiQ