The Handy Funscript & Haptic Sync

Use The Handy with HaptiQ for synchronized funscript playback. The Handy is an onahole that connects via BT4LE. Get started for free.

The Handy connects to HaptiQ over Wi-Fi with its connection key, so there is no Bluetooth pairing and it works in any browser, including Safari on iPhone and iPad. HaptiQ uses HDSP mode and sends position commands.

What The Handy supports

From Buttplug’s device config (v4.198), built into HaptiQ:

Stroke (position): Position output. HaptiQ sends a timed move for every action in the script, so the toy goes to the scripted position in the scripted time.

Connect The Handy over Wi-Fi

Set The Handy up on Wi-Fi with The Handy’s own app first. Its Wi-Fi light should be blue.
Copy the connection key from The Handy app.
In HaptiQ, open Devices, find The Handy (Wi-Fi), paste the key and press Connect.
Run Device Doctor once: it checks the toy is online, switches it to HDSP mode if needed, and measures the round trip so it can set the sync offset.
Buttplug’s config also lists Bluetooth for firmware 4 units, but Wi-Fi is the route HaptiQ supports on every platform.

Device Doctor fixes

Bluetooth is off: Device Doctor checks this first. On Windows turn it on in Settings → Bluetooth & devices; on a Mac use Control Centre; on Android pull down the quick settings. Then press Connect toy again.
Bluetooth permission was blocked: Click the icon left of the address bar → Site settings and allow Bluetooth for haptiq.app. On Android, allow Nearby devices for Chrome (Settings → Apps → Chrome → Permissions) or for the HaptiQ app.
The Bluetooth list is empty: The toy is not advertising. Usual causes: it is off or asleep, it is still connected to the maker’s app or your phone, or it is too far away. Wake it, close the other app, keep it within a metre and press Connect toy again. If the list is still empty, run Device Doctor and press Send diagnostic log so the case can be checked.
Found, but it does not answer or keeps dropping: Close every other app that might hold the toy (the maker’s app, Lovense Remote, Intiface), turn the toy off and on, charge it, and keep it close. Device Doctor reconnects it and runs a feel test. For JoyHub toys, Advanced → Classic Bluetooth mode is a second path if the first one stalls.
Wrong mode: The Handy must be in HDSP mode for web playback; Device Doctor switches it for you. Some JoyHub models show “This model runs smoother in Classic Bluetooth mode” after connecting; press Switch.
Connected, but nothing moves: Run Device Doctor: it sends a test command and asks whether you felt it. Also check the part of the script you are playing actually moves; a flat section of a funscript produces genuine stillness.

Open Device Doctor

Sync offset calibration

Connect the toy, then open Device Doctor (Devices → Device Doctor, or haptiq.app/devices?doctor=1).
Let it run to the Sync calibration step. It measures how late the toy acts and saves that as the toy’s sync offset, so commands go out that many milliseconds early.
If the lag cannot be measured, HaptiQ uses the typical offset other owners of the same toy calibrated, or none at all; the Doctor says which.
The offset is stored per toy and per connection type (built-in Bluetooth, Intiface, Wi-Fi), within ±1000 ms. Run the Doctor again after you change how the toy connects.
Steady lag is what an offset fixes. Lag that comes and goes is signal: move closer, charge the toy, and keep 2.4 GHz Wi-Fi traffic away from it.

The Handy questions

Why does The Handy say it is in the wrong mode?

Web playback needs HDSP. Device Doctor switches it for you; if the message comes back, restart The Handy and run the Doctor again.

Does The Handy work on iPhone?

Yes. It connects over Wi-Fi, not Bluetooth, so it works in Safari and every other iPhone browser today.

All The Handy devices · All brands

Frequently asked questions

Does the Handy work with funscripts?

Yes. A funscript is a device-agnostic motion file, so the same script plays on any supported hardware. HaptiQ converts the motion in a video into a funscript and streams it to your Handy in time with playback.

How does the Handy connect to HaptiQ?

The Handy connects over Bluetooth Low Energy, directly from your browser using the Web Bluetooth API. That works in Chrome, Edge, Opera and other Chromium browsers on desktop and Android. Safari and Firefox do not implement Web Bluetooth, so use a Chromium browser. No extra software is required — no Intiface, no desktop app.

Do I need Intiface or Buttplug.io for the Handy?

No. The Handy pairs straight from the browser, so you do not need Intiface Central or any desktop software. HaptiQ also supports Buttplug.io if you prefer to route through Intiface.

Which browsers support the Handy?

Use Chrome, Edge, Opera or another Chromium browser, on desktop or Android. Safari and Firefox do not support Web Bluetooth.

Can I generate a funscript for the Handy from my own video?

Yes. Upload a video or paste a link, and HaptiQ's motion analysis produces a .funscript you can play on the Handy or export for another player. Large files are uploaded in parts, so multi-gigabyte VR video is supported.

Is the Handy verified to work with HaptiQ?

Yes. The Handy is a verified entry in HaptiQ's device index, meaning its BT4LE or WiFi details have been confirmed rather than inferred from the manufacturer's listing alone.

What kind of device is the Handy?

The Handy is an onahole. HaptiQ maps the vertical motion in a funscript onto whatever actuation the onahole provides, so scripts written for other hardware still play.

Create a free HaptiQ account to connect your Handy and play synced funscripts.

Open in HaptiQ