Step-by-step guide to using the Erostek ET-232 with funscripts in HaptiQ via Buttplug.io via Intiface Central — plus how script motion maps to this estim machine.
As an estim machine, funscript position maps to stimulation intensity where the device protocol supports digital control.
Browsers cannot open a raw serial port to a toy, so the device will not appear in a browser picker at all — that is by design, not a fault. Run Intiface Central on the same machine, confirm it lists the device there first, and only then connect from HaptiQ. If Intiface itself does not see it, the usual causes are a charge-only USB cable or a missing serial driver.
Yes — Intiface Central, on a desktop machine. Serial or Audio cannot be reached from a browser, so Intiface acts as the bridge and HaptiQ talks to it over Buttplug.io. It is free and open source.
The connection and the script are separate steps, and this symptom means the script is fine but commands are not arriving. Confirm the device still shows as connected — Intiface can lose the device without HaptiQ noticing immediately — then check the device is charged and not simultaneously connected somewhere else. A funscript with a flat section will also produce genuine stillness, so scrub to a section with obvious motion before concluding it is broken.
A wired link is stable and low-latency once it works — jitter here almost always means Intiface is starved of CPU, not that the cable is at fault. Close background applications before blaming the connection.
Yes. A funscript is a plain motion file and carries no device information, so any script plays on any supported hardware. HaptiQ can also generate one from your own video, which matters when an existing script was timed to a different cut — that mismatch causes drift no offset can fix.
Erostek ET-232 overview · Funscripts for e-stim devices · Create a free HaptiQ account